Advertiser Disclosure: Daily Tools earns commissions from qualifying purchases.

Best Air Compressors for Power Tools

Air compressors for power tools are central to our modern civilization and technology. Many tools in manufacturing plants and other commercial establishments are powered using compressed air. For example, the automobile industry extensively uses compressed air for powering all sorts of tools to manufacture cars like sandblasters, ratchets, impact wrenches, and paint sprayers.

 

The 3 Best Air Compressors for Power Tools

Here are the best air compressors for power tools.

 

1. Industrial Air IL1682066.MN

At 40 PSI pressure, the machine can produce 6.2 CFM, while at 90 PSI pressure, the machine generates 5.3 CFM.

The 1.6 HP induction motor powers the machine. It can run on both 120V and 240V.

The oil-lubricated single-stage pump machine allows for efficient air compression. The pump has a v-twin cylinder configuration. Since the pump is oil-lubricated, you will have to service it according to the instruction provided in the manual.

 

The pump works quietly compared to other models.

It holds air in the ASME-rated 20-gallon tank.

Large pneumatic tires are installed so that you can move the air compressor to any location with ease.

 

The heavy-duty air compressor is a good solution if you have power tools that run on compressed air. The V-twin configuration is designed to give a larger output of compressed air. Thus, you will have plenty of compressed air for even those tools that demand high flow rates like sand blasters and die grinders. However, make sure that you are operating only one tool at a time.

 

The compressor is a good choice if you need mobility and will be operating power tools one at a time.

 

Pros

  • Uses v-twin cylinder
  • Automatic shutdown when the tank fills up
  • Quiet compared to rival models
  • Pneumatic tires for portability
  • Works on 240V and 120V

 

Cons

  • Pricey

 

2. Makita MAC700 Big Bore 2.0 HP Air Compressor

The Makita MAC700 is capable of generating 3CFM at an air pressure of 90 PSI.

The 2 HP motor can operate the pump at 1730 RPM. The pump is designed to reduce noise and friction.

The pump has a cast iron housing with a piston-cylinder device that is designed to fill up the tank quickly.

The oil-lubricated pump is durable and generates less heat.

The cylinder has a 2.6 gallon capacity for storing compressed air.

You can go up to 130 PSI with this device.

 

Since the device weighs 52 pounds, one person can handle it with ease. The trouble is that the machine does not have tires for mobility.

 

The Makita MAC700 is ideal if you need an air compressor of small capacity. The machine works fine if you will not be using tools that require a lot of compressed air, like sandblasters. Staplers and nailers can do the job perfectly when powered by the Makita MAC700.

 

Pros

  • Fast recovery after the tank is depleted
  • Robust build and construction
  • Portable and the light tank is full in under 2 minutes
  • Relatively low noise level

 

Cons

  • No tires for mobility

 

3. Bostitch BTFP02012

Error: Unknown Link Type

The Bostitch can hold 6 gallons of compressed air in its durable air tank. The pump that generates compressed air is oil-free, which means less maintenance for you.

 

The maximum air pressure goes up to 150 PSI. With such pressure, you can use a variety of power tools for all sorts of applications.

 

At 90 PSI, the device can generate 2.6 SCFM.

 

Since it weighs just 29 pounds, a single person can easily handle the machine.

 

It has a noise level of just under 80 decibels. So although it is not the quietest, it is acceptable for the workshop environment.

 

The Bostitch is one of the most dependable air compressors that you can find.

 

Two couplers are available, due to which you can simultaneously connect and use 2 devices with the Bostitch.

 

Since the compressor has a relatively small capacity, it is not ideal for power-hungry tools that require a high flow rate of compressed air. Such machines work best with moderate power devices like the nailer.

 

Choosing the right air compressor for the job is essential. The aforementioned models are highly reliable air compressors. But they will work only if they are suitable for your needs.

 

Choosing an air compressor might seem overwhelming because you must consider multiple factors before deciding on the best model for your needs.

 

You need to be aware of variables like PSI, SCFM, and CFM.

 

You may have to decide between going for an oil-lubricated compressor or an oil-free compressor.

 

To settle with the right choice, you must first think about your needs. For example, what exactly do you need the air compressor for? What tools will it power, and what capacity will you need?

 

There are 2 broad categories of air compressors. One is meant for light use. This category of air compressors is suitable for inflation tasks like filling up tires and footballs.

 

The other class of air compressors is more heavy-duty in nature. These air compressors are designed to run power tools in a workshop.

 

For powering air-hungry tools like sandblasters, die grinders, and impact wrenches, you need the more powerful air compressor variety.

 

One key parameter to check for is the CFM. To find out how much CFM capacity you will need for your pump, you need to add up the CFM of all your tools and then add up to 30 percent extra. The total of these amounts is what the CFM rating of your air compressor should be.

 

Another factor to pay attention to is power. Air compressors require electricity to function. Many are designed to work on 120 V. there are some models that can also work at 240 V.

 

For an air compressor that you will frequently use, make sure that you have a dedicated power outlet in your workshop.

 

Pros

  • Able to connect with two tools
  • Requires very little maintenance
  • Budget-friendly
  • Relatively lightweight

 

Cons

  • Lacks tires

 

About Chris

When Chris first bought a house, he quickly realized that he was now going to need to be a weekend handyman. Every project that he worked on, he kept realizing that he needed more and more DIY tools. Chris is also someone who likes to do a lot of research before making large purchases. Since he had already done most of the research, Chris decided to put the info that he accumulated about his favorite daily tools onto DailyTools.net.